SX-577 功能特点:
1.采用多用输出插座工作由微电脑控制,实现独立顺序开关输出电源和连接控制工作。
2.在全部电源输出接通后还可以用“直通开关”按键,即时通断任何一个电源的输出以方便单独处理
某一个器材的突发事故。
3.在多合连接机的时候非常方便,只在用控制信号线(注:必须使用USB线)把每台连接起来就可以,连接
好之后但必须注意:被视为辅机的时序电源控制器的电源开关必须打到“OFF/关的位置,否则会引起失控。
4.前面板还特别设有辅助输出插座,为维修或试机提供了极大的方便,还提供电源电压电流数字显示表,
用来监视电压是否正常。
1.The multi-purpose output socket is controlled by a microcomputer to realize independent sequential switching
output power supply and connection control.
2. After all the power output is connected, the "through switch" button can be used to instantly turn off the output
of any power supply for the convenience of dealing with a sudden accident of a single equipment.
3. It is very convenient when the multi-connection machine is in use, only the control signal line (note: U must be
used). SB line) can be connected with each one, but after connection, it must be noted that the power switch of
the sequential power supply controller regarded as an auxiliary must be hit "OFF/off position, otherwise it will
cause out of control
4. The front panel also has an auxiliary output socket, which provides great convenience for maintenance or test
machine, and also provides a digital display of power supply voltage and current to monitor whether the voltage
is normal or not.
